PSC SWEPCO 715 Power Steering Fluid 1 QT PSC Performance Steering Components
SWEPCO 715 Power steering/Hydraulic Oil is a new generation high performance oil designed to assure efficient, smooth operation of power-assisted steering and hydraulic systems. It is engineered and blended precisely from the very finest high VI paraffinic base stocks available and the most advanced additive chemistry, including Lubium, a unique chemical additive developed by SWEPCOs R and D Lab for the exclusive use in certain SWEPCO lubricants.
SWEPCO 715 Power Steering/Hydraulic Oil is especially formulated to meet requirements for power steering/hydraulic units in U.S. and Imported Autos (excluding Honda. Honda recommends Only Honda fluids)
Features:
- High VI paraffinic base stock
- Contains LUBIUM (additive)
- Anti-foam protection
- Anti-squeal additive
MSRP Price: $10.50
Our Price: $10.50
PSC AN Adapter Fitting 8AN X 18MM X 1.50 Non O Ring PSC Performance Steering Components
Most commonly used to adapt High Pressure Side Port on 1980 and Newer GM Saginaw and PSC BIG BORE XD2 Steering Gearboxes to 8AN connection.
Features:
- Fitting Style: Adapter
- Fitting Category: AN to Metric Threads
- Fitting Angle: Straight
- Fitting Material: Aluminum
- Fitting Finish: Zinc
- Fitting Attachment 1: Male AN
- Fitting Size 1: 8AN
- Fitting Attachment 2: Male Metric without O-Ring
- Fitting Size 2: 18MM X 1.5
- Swivel: No
- Gauge Port: No
- O-Rings Included: Yes
- Quantity: Each
MSRP Price: $12.00
Our Price: $12.00
PSC AN Adapter Fitting 8AN X 16MM X 1.50 Non O Ring PSC Performance Steering Components
Most commonly used to adapt Low Pressure Side Port on 1980 an Newer GM Saginaw and PSC BIG BORE XD2 Steering Gearboxes to 8AN connection.
Also converts 16MM Female Saginaw P-Series Power Steering Pump Pressure Fitting to 8AN
Features:
- Fitting Style: Adapter
- Fitting Category: AN to Metric Threads
- Fitting Angle: Straight
- Fitting Material: Aluminum
- Fitting Finish: Zinc
- Fitting Attachment 1: Male AN
- Fitting Size 1: 8AN
- Fitting Attachment 2: Male Metric without O-Ring
- Fitting Size 2: 16MM X 1.5
- Swivel: No
- Gauge Port: No
- O-Rings Included: Yes
- Quantity: Each
MSRP Price: $12.00
Our Price: $12.00
AN Adapter Fitting 8AN X 18MM X 1.50 Non O Ring PSC Performance Steering Components
Most commonly used to adapt High Pressure Side Port on 1980 and Newer GM Saginaw and PSC BIG BORE XD2 Steering Gearboxes to 8AN connection.
Features:
- Fitting Style: Adapter
- Fitting Category: AN to Metric Threads
- Fitting Angle: Straight
- Fitting Material: Aluminum
- Fitting Finish: Zinc
- Fitting Attachment 1: Male AN
- Fitting Size 1: 8AN
- Fitting Attachment 2: Male Metric without O-Ring
- Fitting Size 2: 18MM X 1.5
- Swivel: No
- Gauge Port: No
- O-Rings Included: Yes
- Quantity: Each
MSRP Price: $12.00
Our Price: $12.00
AN Adapter Fitting 8AN X 16MM X 1.50 Non O Ring PSC Performance Steering Components
Most commonly used to adapt Low Pressure Side Port on 1980 an Newer GM Saginaw and PSC BIG BORE XD2 Steering Gearboxes to 8AN connection.
Also converts 16MM Female Saginaw P-Series Power Steering Pump Pressure Fitting to 8AN
Features:
- Fitting Style: Adapter
- Fitting Category: AN to Metric Threads
- Fitting Angle: Straight
- Fitting Material: Aluminum
- Fitting Finish: Zinc
- Fitting Attachment 1: Male AN
- Fitting Size 1: 8AN
- Fitting Attachment 2: Male Metric without O-Ring
- Fitting Size 2: 16MM X 1.5
- Swivel: No
- Gauge Port: No
- O-Rings Included: Yes
- Quantity: Each
MSRP Price: $12.00
Our Price: $12.00
PSC Axle/Differential Breather Vent PSC Performance Steering Components
Vent Bellows allow axle and differential housings, transmission cases, and transfer cases to vent without the loss of fluids and prevents the introduction of contaminates.
Fits any 1/4 Inch tubing or low pressure barb fitting.
Note:
NOT FOR USE with a power steering fluid reservoir. The heat generated in most power steering systems require more expansion than these bellows allow.
Over-pressurization of the power steering system can result in catastrophic failure of individual components or the entire system.
MSRP Price: $15.00
Our Price: $15.00
Axle/Differential Breather Vent PSC Performance Steering Components
Vent Bellows allow axle and differential housings, transmission cases, and transfer cases to vent without the loss of fluids and prevents the introduction of contaminates.
Fits any 1/4 Inch tubing or low pressure barb fitting.
Note:
NOT FOR USE with a power steering fluid reservoir. The heat generated in most power steering systems require more expansion than these bellows allow.
Over-pressurization of the power steering system can result in catastrophic failure of individual components or the entire system.
MSRP Price: $15.00
Our Price: $15.00
PSC SWEPCO 306 Supreme Formula 15W40 Engine Oil 1 Quart PSC Performance Steering Components
SWEPCO 306 Supreme Formula Engine Oilis a premium quality, multi-purpose, all-season, multi-grade, extended service engine oil specially formulated to provide superior performance under the most demanding operating conditions. SWEPCO 306 is formulated from the very finest high VI 100 percent solvent refined paraffinic base stocks available and the most advanced additive chemistry, including DIMONYL, SWEPCOs proprietary anti-wear additive.
Easier cold weather starting with less wear are additional benefits associated with SWEPCO multi-graded weights. SWEPCO 306 provides outstanding wear control, service life, cleanliness, thermal stability and corrosion resistance for most diesel and gasoline engines.
Features:
- Contains DIMONYL
- High VI solvent extracted paraffinic base stocks
- Exceeds most major engine manufacturers recommendations
- Contains detergent/dispersants
- Oxidation inhibitors
- Rust and corrosion inhibitors
- Anti-foam inhibitor
- Anti-wear inhibitors
- Pour depressant
PSC Rod End 5/8-18 X 5/8 Right Hand Female PSC Performance Steering Components
PSC Rod Ends featuring 4130 Chromoly steel bodies with 52100 Spherical Bearings that are precision ground, heat treated, and hard chrome plated. Self-Lubricated by a injection molded Nylafiber matrix extends service life and reduces required maintenance.
Features:
- Rod End Style: Spherical Bearing
- Rod End Attachment: Female Threads, Eyelet
- Thread Pitch: 5/8-18
- Thread Type:RH Female
- Material Type: 4130 Chromoly Steel
- Finish:Anodized
- Color:Clear
- Hole Diameter:0.625 Inch
- Grease Fitting:No
WARNING:
Do Not Lubricate! The rod ends listed above are self-lubricating. Additional lubricants may attract dirt and/or interfere with the self-lubricating properties of the component and may cause accelerated wear.
Safety First! Do Not Operate A Vehicle With Worn or Contaminated Rod Ends.
MSRP Price: $17.00
Our Price: $17.00
PSC Rod End 3/4-16 X 5/8 Right Hand Female PSC Performance Steering Components
PSC Rod Ends featuring 4130 Chromoly steel bodies with 52100 Spherical Bearings that are precision ground, heat treated, and hard chrome plated. Self-Lubricated by a injection molded Nylafiber matrix extends service life and reduces required maintenance.
Features:
- Rod End Style: Spherical Bearing
- Rod End Attachment: Female Threads, Eyelet
- Thread Pitch: 3/4-16
- Thread Type:RH Female
- Material Type: 4130 Chromoly Steel
- Finish:Anodized
- Color:Clear
- Hole Diameter:0.625 Inch
- Grease Fitting:No
WARNING::
Do Not Lubricate! The rod ends listed above are self-lubricating. Additional lubricants may attract dirt and/or interfere with the self-lubricating properties of the component and may cause accelerated wear.
Safety First! Do Not Operate A Vehicle With Worn or Contaminated Rod Ends
MSRP Price: $17.00
Our Price: $17.00
PSC Rod End 3/4-16 X 3/4 Left Hand Male PSC Performance Steering Components
PSC Rod Ends featuring 4130 Chromoly steel bodies with 52100 Spherical Bearings that are precision ground, heat treated, and hard chrome plated. Self-Lubricated by a injection molded Nylafiber matrix extends service life and reduces required maintenance.
Features:
- Rod End Style: Spherical Bearing
- Rod End Attachment: Male Threads, Eyelet
- Thread Pitch: 3/4-16
- Thread Type: LH Male
- Material Type: 4130 Chromoly Steel
- Finish:Anodized
- Color:Clear
- Hole Diameter:0.750 Inch
- Grease Fitting:No
WARNING::
Do Not Lubricate! The rod ends listed above are self-lubricating. Additional lubricants may attract dirt and/or interfere with the self-lubricating properties of the component and may cause accelerated wear.
Safety First! Do Not Operate A Vehicle With Worn or Contaminated Rod Ends
MSRP Price: $17.00
Our Price: $17.00
PSC Rod End 5/8-18 X 5/8 Right Hand Male PSC Performance Steering Components
PSC Rod Ends featuring 4130 Chromoly steel bodies with 52100 Spherical Bearings that are precision ground, heat treated, and hard chrome plated. Self-Lubricated by a injection molded Nylafiber matrix extends service life and reduces required maintenance.
Features:
- Rod End Style: Spherical Bearing
- Rod End Attachment: Male Threads, Eyelet
- Thread Pitch: 5/8-18
- Thread Type: RH Male
- Material Type: 4130 Chromoly Steel
- Finish:Anodized
- Color:Clear
- Hole Diameter:0.625 Inch
- Grease Fitting:No
WARNING::
Do Not Lubricate! The rod ends listed above are self-lubricating. Additional lubricants may attract dirt and/or interfere with the self-lubricating properties of the component and may cause accelerated wear.
Safety First! Do Not Operate A Vehicle With Worn or Contaminated Rod Ends
MSRP Price: $17.00
Our Price: $17.00
PSC Rod End 3/4-16 X 3/4 Right Hand Male PSC Performance Steering Components
PSC Rod Ends featuring 4130 Chromoly steel bodies with 52100 Spherical Bearings that are precision ground, heat treated, and hard chrome plated. Self-Lubricated by a injection molded Nylafiber matrix extends service life and reduces required maintenance.
Features:
- Rod End Style: Spherical Bearing
- Rod End Attachment: Male Threads, Eyelet
- Thread Pitch:3/4-16
- Thread Type: RH Male
- Material Type: 4130 Chromoly Steel
- Finish:Anodized
- Color:Clear
- Hole Diameter:0.750 Inch
- Grease Fitting:No
WARNING::
Do Not Lubricate! The rod ends listed above are self-lubricating. Additional lubricants may attract dirt and/or interfere with the self-lubricating properties of the component and may cause accelerated wear.
Safety First! Do Not Operate A Vehicle With Worn or Contaminated Rod Ends
MSRP Price: $17.00
Our Price: $17.00
PSC SWEPCO 101 Moly Grease PSC Performance Steering Components
A Premium Quality, Non-Melt, Multi-Purpose Grease Made With Technical Fine Grade Powdered Moly for Unexcelled Control of Wear, Friction and Heat. SWEPCO 101 Moly Greaserepresents the state of the artќ in grease technology, combining superior base stocks and gelling agent with the proven performance of powdered moly and other highly effective additives.
Its advanced chemistry outperforms competitive top of the lineќ greases in a number of important areas, including friction reduction heat and wear control high heat and oxidation resistance cold temperature performance service life and lubrication cost control.
Features:
- Non-melt grease that will not melt at any temperature
- Contains the technical fine grade Molybdenum Disulfide (Moly Powder)
- Optimum performance range is -30 F to 500 F (-34 C to 260 C)
- Withstands up to 500,000 pounds per square inch of pressure
- Contains SWEPCOs proprietary anti-friction and anti-wear additive, LUBIUM
PSC SWEPCO 503 Premium Gasoline Improver 12OZ Bottle PSC Performance Steering Components
SWEPCO 503 is a unique blend of specialized high-temperature-resistant solvents and highly effective rust and corrosion inhibitors. The carefully balanced solvent portion of the formulation is extremely effective for removal of all forms of harmful engine deposits as well as for prevention of their formation.
SWEPCO 503 is highly effective for removal of gum and other residues which tend to form in fuel injectors, fuel tanks, fuel filters and fuel lines, inhibiting proper fuel delivery and robbing power.
Features:
- Keeps fuel injectors and fuel delivery system clean
- Eliminates carbon deposits on intake and exhaust valves
- Only 60 percent burns and 40 percent remains to lubricate
- Reduces wear
- Eliminates sticky valves, improves compression
- Dissolves harmful gums
- 12oz
